The Everpure EV979580 E‑10 Prefilter System is a complete prefiltration unit that includes the E‑Series housing and the Everpure EC110 cartridge (EV9534‑12). Designed to remove larger dirt and rust particles, it extends the life of downstream fine carbon block filters in foodservice and beverage applications.
Key Installation Requirements:
- Wall‑mounted installation with secure bracket support
- Cold water line only (35–100°F operating temperature)
- Supply line pressure: 10–125 PSI, non‑shock
- 3/4" FNPT inlet and outlet connections (reducers included)
- Install vertically with bowl hanging down
- Allow 2‑1/2" clearance below housing for cartridge replacement
Important Notes Before Installing:
- Do not connect to hot water lines
- Lubricate O‑ring properly before use
- Always depressurize water line before servicing
- Replace cartridge every 6 months, or sooner if flow diminishes
- Use only genuine Everpure EC110 cartridges for certified performance
- Flush system thoroughly after installation to remove carbon fines
Basic Installation Overview:
- Choose a mounting location that supports the full weight of the system
- Shut off cold water supply and depressurize line
- Mount housing vertically with bowl hanging down
- Connect inlet and outlet plumbing to 3/4" FNPT ports
- Insert EC110 cartridge (EV9534‑12) into housing sump
- Reattach sump securely to housing head
- Turn on water supply and check for leaks
- Flush system for several minutes to clear particulates
For complete specifications and installation guidelines, download the official EV979580 Spec Sheet & Installation Manual.
Want to Order the EV979580 E‑10 Prefilter System or Get a Custom Quote?
Shop EV979580 E‑10 Prefilter System