Installation
- Install cartridges vertically with filter heads down; allow clearance below for replacement.
- Insert EC210 prefilter, four MC2 cartridges, and SS‑IMF cartridge with spacer into designated bowls.
- Ensure SS‑IMF cartridge is installed with black o‑ring seal facing up.
- Flush system by running water for 5 minutes at full flow to purge air and carbon particles.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed technician.
Maintenance
- Replace cartridges every 6 months or when rated capacity is reached.
- Change cartridges if pressure falls below 10 psi.
- Replace SS‑IMF cartridge before Hydroblend™ compound is fully depleted.
- Replace EC210 prefilter when dirt penetrates to the inner core.
- Inspect fittings and connections periodically for leaks; reseat if necessary.
- For service or repairs, consult the manual or a licensed technician.