The Everpure EV927076 H‑300 is a compact under‑sink drinking water system that reduces lead, chlorine taste and odor, VOCs, and cysts. With a 0.5 micron carbon block filter and 300‑gallon capacity, it delivers cleaner, great‑tasting water directly from your kitchen faucet.
Key Installation Requirements:
- Under‑sink installation with cold water line connection
- Operating pressure: 10–125 PSI
- Operating temperature: 35–100°F
- Requires dedicated faucet or compatible connection
- Clearance for cartridge replacement (vertical space)
- Standard plumbing tools required
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing cartridge
- Use only genuine Everpure cartridges for certified performance
- Flush system thoroughly after installation to remove carbon fines
- Replace cartridge annually or when flow rate diminishes
Basic Installation Overview:
- Shut off cold water supply under sink
- Install filter head assembly to cabinet wall using screws provided
- Connect inlet tubing from cold water supply to filter head inlet
- Connect outlet tubing from filter head to dedicated faucet or existing line
- Insert cartridge into filter head and lock into place
- Turn on water supply and check for leaks
- Flush system for several minutes to clear carbon fines
- Test faucet flow and taste; confirm proper operation
For complete specifications and installation guidelines, download the official H‑300 Spec Sheet and the Installation Manual.
Want to Order the EV927076 H‑300 Drinking Water System or Get a Custom Quote?
Shop EV927076 H‑300 Drinking Water System