Installation
- Install cartridge vertically or horizontally; ensure secure mounting if wall‑mounted.
- Connect inlet and outlet tubing with shut‑off valve upstream; do not exceed 116 psi.
- Flush cartridge at time of installation to remove air and carbon particles.
- Adjust bypass settings as required for local water hardness.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Replace cartridge when rated capacity is reached or at least once per year.
- Use titration kit (not strips) to verify hardness reduction performance.
- Inspect fittings and tubing periodically for leaks; reseat if necessary.
- Clean exterior surfaces with mild, non‑abrasive cleaner.
- For service or repairs, consult the manual or a licensed technician.