Installation
- Turn off the water supply before starting.
- Remove the fountain’s cover panels and mounting plate as instructed.
- Position the retrofit kit and mark/drill mounting holes and waterline opening.
- Secure the mounting plate and drain tray to the wall using proper fasteners.
- Insert the bottle filler into the mounting slots and tighten screws carefully.
- Route the water line through the panel and connect to the fountain supply.
- Reinstall the top and bottom covers once connections are complete.
- Turn the water supply back on, check for leaks, and flush the system until water runs clear.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Inspect the bottle filler and fountain regularly for leaks or loose fittings.
- Clean exterior surfaces with a soft cloth and mild cleaner.
- Check stream height and adjust if needed for proper flow.
- Replace filter or service components if water taste, odor, or flow issues occur.
- For service or repairs, consult the manual or a licensed technician.