The Elkay VRC8S Single‑Level Drinking Fountain is a vandal‑resistant, wall‑mounted cooler designed for heavy‑duty commercial use. It provides reliable hydration with a barrier‑free ADA compliant design and durable stainless steel construction.
Key Installation Requirements:
- Wall‑mounted installation with hanger bracket support
- Cold water line only (40–100°F operating temperature)
- Water supply line: 3/8" O.D. copper tube with shut‑off valve (not included)
- Drain connection: 1‑1/4" O.D. trap (not included)
- Electrical supply: 115V / 60Hz with dedicated GFCI circuit recommended
- Maintain 6" clearance from cabinet louvers to wall for ventilation
- Allow proper clearance for service and maintenance
Important Notes Before Installing:
- Do not connect to hot water line.
- Stream height is factory set for 45–50 PSI; adjust if supply pressure varies.
- Certified ADA compliant when installed at proper height.
- All service should be performed by authorized personnel.
- Always refer to the official Elkay VRC8S Spec Sheet for detailed specifications and compliance information.
Basic Installation Overview:
- Remove hanger bracket from cooler and mount securely to wall using all bolt holes.
- Hang cooler on bracket, ensuring proper engagement with slots on the back.
- Connect water inlet line to shut‑off valve and 3/8" tubing.
- Install 1‑1/4" trap to drain line and tighten securely.
- Plug unit into grounded GFCI electrical outlet.
- Adjust stream height screw via pushbutton access hole if needed to match supply pressure.
- Reinstall front panel and confirm proper operation.
For complete step‑by‑step instructions, download the official Elkay VRC Series Installation & Maintenance Manual
Want to Order the VRC8S or Get a Custom Quote?
Shop now at BottleFillingStations.com