Installation
- Prepare wall framing to support unit weight and follow rough‑in dimensions provided in the package manual.
- Install water inlet and drain line per rough‑in guide.
- Mount back panel securely using hanger bracket or wall plate assembly.
- Attach fountain body with supplied hardware and tighten securely.
- Connect water supply line, flush thoroughly, and check for leaks.
- Adjust bubbler stream height as needed; factory set at 35 psi.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Inspect bubbler orifice periodically; clean if flow is irregular.
- Adjust stream regulator as needed to maintain proper flow.
- Check quick‑connect fittings for leaks and reseat tubing if necessary.
- Clean basin and exterior surfaces with non‑abrasive cleaner.
- For service or repairs, consult the manual or a licensed plumber.