Installation
- Turn off water supply and unplug the cooler before beginning installation.
- Remove the wrapper and access the solenoid assembly using proper tools.
- Disconnect inlet and outlet water lines from the old solenoid.
- Transfer wires to the new solenoid terminals securely.
- Mount the new solenoid to the bracket with provided screws, inlet facing left side.
- Restore water and power, then test bubbler flow and check for leaks.
Maintenance
- Inspect solenoid connections and tubing periodically for leaks or wear.
- Verify bubbler stream height and adjust regulator as needed.
- Ensure fan blade spins freely during routine checks.
- Replace worn parts only with authorized Elkay components.
- Have service performed by authorized personnel for safety and compliance.