Installation
- Make sure the wall is strong enough to hold the fountain (up to 150 lbs).
- Turn off the water supply before starting.
- Mount the hanger bracket securely to the wall at the correct height.
- Connect the water line to the fountain inlet and check for leaks.
- Attach the drain tube to the waste outlet and tighten securely.
- Secure the fountain to the wall with bolts and reinstall the access panel.
- Turn the water supply back on and test the bubbler stream.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Check the bubbler stream regularly; adjust if needed using the regulator screw.
- Inspect fittings and tubing for leaks; reseat connections if necessary.
- Clean the exterior with a soft cloth and mild cleaner.
- If water flow is uneven, check for mineral deposits and clean the orifice gently.
- For service or repairs, consult the manual or a licensed technician.