The Elkay PF5M WaterSentry® 5‑Micron Sediment Pre‑Filter is designed to reduce dirt, sand, and other particulates from the water supply, extending the life of downstream filters and improving water quality.
Key Installation Requirements:
- Cold water line only (40–100°F operating temperature)
- Maximum inlet pressure: 100 psi (689 kPa)
- 3/8" O.D. tubing inlet connection
- 1/4" O.D. tubing outlet connection
- Allow minimum 14" clearance below filter head for cartridge changes
Important Notes Before Installing the PF5M:
- Do not connect to hot water line.
- Replace filter every 6 months or when flow rate slows; performance varies with local water conditions.
- Certified to NSF/ANSI 42 and 372 for material safety and structural integrity.
- Always refer to the official Elkay PF5M Spec Sheet for detailed specifications and compliance information.
Basic Installation Overview:
- Mount filter head securely using bracket and screws supplied.
- Connect cold water supply valve to filter inlet via shut‑off valve and 3/8" O.D. tubing.
- Connect outlet tubing from pre‑filter to downstream carbon filter or bottle filler system.
- Turn on water supply and flush filter to purge air and fine particles before use.
- Inspect all connections for leaks and correct as needed.
For complete step‑by‑step instructions, download the official Elkay PF5M Installation & Maintenance Guide
Want to Order the PF5M or Get a Custom Quote?
Shop now at BottleFillingStations.com