The Elkay MPW200 In-Wall Mounting Plate installs behind the finished wall to support bi-level on-wall non-refrigerated drinking fountains. It can be fastened directly to wall studs or used with optional ML100 support legs.
Key Installation Requirements:
- Compatible Fountain: Bi-level on-wall non-refrigerated models, including Soft Sides®, SwirlFlo®, OVL II™, HDFF and HRF series
- Mounting Method: Direct to wall studs, or with Elkay ML100 support legs (sold separately)
- Stud Hardware: 3/8" mounting hardware for direct-to-stud installs (supplied by others)
- Included Hardware: Eight 5/16-18 x 6" threaded rods with hex nuts and flat washers
- Fountain Manual: Required for water supply, waste and electrical locations
Important Notes Before Installing:
- All installation and service should be performed by an authorized service person.
- Check the installation for compliance with plumbing, electrical and other applicable codes.
- Read the full instructions before starting and keep them for future reference.
- Check that all parts on the parts list were received before beginning.
- U-bolts are included with the ML100 support legs, not with the MPW200.
- Threaded rods, and U-bolts when used, may need to be trimmed after installation.
Basic Installation Overview:
- Confirm the configuration: Choose the standard high/low or reverse low/high layout. Flip the plate for the reverse configuration.
- Prepare the support: Locate the wall studs, or install the ML100 support legs per their instructions.
- Position the plate: Place the plate behind the finished wall using the dimensions shown in the manual for your fountain series.
- Secure the plate: Fasten it to the studs with 3/8" hardware, or to the ML100 legs with the supplied U-bolts.
- Install the threaded rods: Thread the rods into the plate's mounting holes for your fountain series.
- Mount the fountain: Hang the fountain on the rods, secure it with the washers and nuts, then complete the plumbing per the fountain's manual.
- Trim and finish: Trim the threaded rods or U-bolts as needed.
For detailed diagrams and dimensions, view the Elkay MPW200 Installation Manual.
Want to Order the Elkay MPW200 In-Wall Mounting Plate?
Shop the Elkay MPW200