Installation
- Position the upper and lower mounting plates behind the finished wall at the correct height for your cooler model.
- Secure support columns, threaded rods, U‑bolts, nuts, and washers as shown in the kit instructions.
- Ensure the hanger bracket furnished with the cooler is aligned to the proper mounting height.
- Drill mounting holes as required and fasten the frame securely to wall studs.
- Trim U‑bolts and threaded rods if needed after installation.
- For ADA installations, reduce mounting height by 3" for children’s coolers.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Inspect mounting hardware periodically to ensure cooler remains securely supported.
- Tighten nuts and bolts if any loosening occurs over time.
- Check wall integrity around the frame during routine service of the cooler.
- Clean exposed surfaces with a soft cloth and mild cleaner.
- For service or repairs, consult the manual or a licensed technician.