The Elkay LZSTL8WSMP‑PF Enhanced EZH2O Bi‑Level Bottle Filling Station provides filtered, refrigerated water with advanced PFAS (PFOA/PFOS) reduction. Its dual‑level ADA design offers accessible hydration while supporting sustainability and reducing plastic waste.
Key Installation Requirements:
- Wall‑mounted installation with hanger bracket support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz with GFCI outlet required
- Water supply line: 3/8" O.D. copper tube with shut‑off valve (not included)
- Drain connection: 1‑1/4" O.D. trap (not included)
- Maintain 6" clearance from cabinet louvers to wall for ventilation
- Allow proper clearance for filter cartridge changes
Important Notes Before Installing:
- Do not connect to hot water line.
- Replace filter cartridge (71300C PFAS reduction) annually or when flow rate slows.
- Stream height is factory set for 35 PSI; adjust if supply pressure varies.
- Certified to meet ADA requirements when installed at proper height.
- Always refer to the official Elkay LZSTL8WSMP‑PF Spec Sheet for detailed specifications and compliance information.
Basic Installation Overview:
- Remove hanger bracket from cooler and mount securely to wall using all six bolt holes.
- Hang cooler on bracket, ensuring proper engagement with slots on the back.
- Connect water inlet line to shut‑off valve and 3/8" tubing.
- Install 1‑1/4" trap to drain line and tighten securely.
- Plug unit into grounded GFCI electrical outlet.
- Install PFAS reduction filter cartridge (71300C) into filter head and rotate clockwise until seated.
- Turn on water supply, flush system, and check for leaks.
- Reinstall front panel and confirm proper operation.
For complete step‑by‑step instructions, download the official Elkay Enhanced EZH2O Installation & Maintenance Guide
Want to Order the LZSTL8WSMP‑PF or Get a Custom Quote?
Shop now at BottleFillingStations.com