The Elkay LVRCGRN8WSK is a vandal‑resistant single bottle filling station with integrated filtered cooler. Designed for high‑traffic public areas, it delivers chilled, filtered water with hands‑free sensor activation and heavy‑duty construction for durability.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connection required for cooler and bottle filler basin
- Maintain clearance for filter replacement and servicing
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing filter
- Ensure sensor lens is unobstructed for accurate activation
- Use only genuine Elkay filters to maintain certification and performance
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to wall structure to meet vandal‑resistant requirements
Basic Installation Overview:
- Install mounting frame securely to support cooler and bottle filler weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Install filter head and cartridge into bracket, connect tubing per routing diagram
- Hang main panel on frame, ensuring wires and tubing are not pinched
- Connect drain line from cooler and bottle filler to building drain system
- Wire electrical supply to grounded outlet; verify LCD bottle counter illuminates
- Test bottle filler sensor activation and bubbler stream height; adjust regulator if needed
- Install bottom cover plates and tighten back panel screws
For complete specifications and installation guidelines, download the official LVRCGRN8WSK Spec Sheet and the Installation & Maintenance Manual.
Want to Order the LVRCGRN8WSK Bottle Filling Station or Get a Custom Quote?
Shop LVRCGRN8WSK Bottle Filling Station