Elkay LK1110 Installation Instructions & Guidance

The Elkay LK1110 gooseneck glass filler adds a push lever glass filling spout to Elkay water coolers and drinking fountains. It installs directly on glass filler-prepped units and comes with instructions for adding it to non-prepped models. Professional installation by a licensed plumber or qualified service technician is recommended for a secure, leak-free connection.

 

Key Installation Requirements:

• An Elkay water cooler or drinking fountain with glass filler prep, or a non-prepped unit modified per the included instructions
• Access to the water supply inside the cooler or fountain
• Building water supply pressure within the operating range listed in your cooler or fountain’s installation manual (the LK1110 is fed from the unit’s internal water line)
• No electrical connection required for the glass filler

 

Important Notes Before Installing the LK1110:

• The LK1110 is sold separately and does not come pre-installed on glass filler-prepped coolers or fountains.
• Installing on a non-prepped unit takes extra steps, so follow the included instructions closely.
• Shut off the water supply (and disconnect power on refrigerated units) before working inside the cooler or fountain.
• The LK1110 is not listed as ADA compliant. Check the cooler or fountain model's ADA requirements before choosing a mounting location.
• Always refer to the official Elkay LK1110 Spec Sheet for dimensions and compatibility, and to the cooler or fountain's own installation manual for unit-specific steps.
  

 

Basic Installation Overview:

1. Confirm whether your cooler or fountain is glass filler-prepped. If it isn't, follow the included instructions for non-prepped units.
2. Shut off the water supply to the unit and disconnect power on refrigerated models.
3. Remove the unit's access panel or cover as described in the cooler or fountain's manual.
4. Mount the glass filler at the prepped location and connect it to the water supply according to the included instructions.
5. Replace the access panel, restore water and power, and check all connections for leaks.
6. Press the push lever to flush the line and confirm proper flow.

Want to Order the LK1110 or Get a Custom Quote?

Shop now at BottleFillingStations.com