The Elkay LBWDCM0SSC‑FM Liv Built‑In Filtered Bottle Filler is a sleek, built‑in water dispenser designed for modern residential and commercial spaces. Featuring filtered water delivery and touchless activation, it provides a convenient and hygienic hydration solution with a flush‑mount design.
Key Installation Requirements:
- Flush‑mount installation into wall cavity
- Cold water line connection (35–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet
- Drain connection required for condensate
- Clearance for filter replacement and servicing
- Follow ADA guidelines for installation height
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing filter
- Use only genuine Elkay filters to maintain certification and performance
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to wall structure to resist vibration
Basic Installation Overview:
- Shut off water supply and depressurize system
- Prepare wall cavity and framing for flush‑mount installation
- Mount bottle filler securely into cavity using provided hardware
- Connect cold water supply line to inlet; flush line thoroughly
- Install filter cartridge into housing and lock into place
- Connect drain line to building drain system
- Wire electrical supply to grounded outlet; verify system powers on
- Test dispenser activation and water flow
- Install cover plates and finish trim
For complete specifications and installation guidelines, download the official LBWDCM0SSC‑FM Spec Sheet and the Installation Manual.
Want to Order the LBWDCM0SSC‑FM Liv Built‑In Filtered Bottle Filler or Get a Custom Quote?
Shop LBWDCM0SSC‑FM Liv Built‑In Filtered Bottle Filler