The Elkay LBWDC00BKC (Midnight Black) is part of the Liv Pro™ Series of filtered water dispensers. Designed for commercial use, they provide ambient filtered water with hands‑free sensor activation, Green Ticker™, and a sleek wall‑mount design.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier or support bracket
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz, single phase
- Maintain clearance for filter replacement and servicing
- Indoor installation only; not rated for outdoor use
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑refrigerated; optional remote chiller can be added if chilled water is required
- Stream height is factory set for 45–50 PSI; adjust if supply pressure varies
- Always depressurize system before servicing or replacing filter
- Use only genuine Elkay filters to maintain certification and performance
- Ensure ADA compliance by following proper installation height guidelines
Basic Installation Overview:
- Mount in‑wall carrier or bracket securely to wall
- Connect cold water supply line to inlet
- Connect drain line if applicable
- Wire electrical supply to 115V / 60Hz outlet
- Install filter cartridge into filter head and rotate clockwise until seated
- Turn on water supply and flush system for 5 minutes
- Test sensor activation and Green Ticker™ display for proper operation
For complete specifications and installation guidelines, download the official LBWDC00BKC Spec Sheet and the Liv Pro Installation & Maintenance Manual.
Want to Order the Liv Pro™ Series Dispensers or Get a Custom Quote?