The Elkay EZSTL8WSLK is a bi‑level, filterless bottle filling station with integrated coolers. Designed for high‑traffic indoor environments, it delivers chilled water with dual ADA‑compliant access points and hands‑free sensor activation.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connections required for both cooler basins and bottle filler
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is filterless — delivers chilled water only
- Always depressurize water line before servicing
- Ensure sensor lenses are unobstructed for accurate activation
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to wall structure to resist vandalism
Basic Installation Overview:
- Install in‑wall carrier securely to support dual cooler and bottle filler weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Mount cooler and bottle filler assembly to carrier, ensuring wires and tubing are not pinched
- Connect drain lines from both coolers and bottle filler to building drain system
- Wire electrical supply to grounded outlet; verify LCD bottle counter illuminates
- Test bottle filler sensor activation and bubbler stream height; adjust regulator if needed
- Install bottom cover plates and tighten back panel screws
For complete specifications and installation guidelines, download the official EZSTL8WSLK Spec Sheet and the Installation Manual.
Want to Order the EZSTL8WSLK Bottle Filling Station or Get a Custom Quote?
Shop EZSTL8WSLK Bottle Filling Station