The Elkay EHWM214C is a wall‑mounted Soft Sides® drinking fountain engineered with vandal‑resistant features. Its ADA‑compliant design provides accessible hydration for schools, offices, and public facilities.
Key Installation Requirements:
- Wall‑mounted installation with proper carrier support
- Cold water line only (40–100°F operating temperature)
- Supply line pressure: 20–105 PSI (regulator required if above 105 PSI)
- Drain connection required for fountain basin
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑filtered — delivers ambient water only
- Always depressurize water line before servicing
- Outdoor installation requires winterization or protection in extreme climates
- Ensure proper drainage to avoid water damage from spillage
- Secure fountain firmly to wall structure to resist vandalism
Basic Installation Overview:
- Install in‑wall carrier to support fountain weight
- Position fountain assembly and secure to wall structure
- Connect cold water supply line to inlet; flush line thoroughly
- Connect drain line from basin to building drain system
- Pressurize system slowly and check for leaks
- Test bubbler stream height; adjust regulator if needed
- Install cover plates and finish trim
For complete specifications and installation guidelines, download the official EHWM214C Spec Sheet and the Installation Manual.
Want to Order the EHWM214C Drinking Fountain or Get a Custom Quote?
Shop EHWM214C Drinking Fountain