The Elkay EDFPVR217C Soft Sides® Bi‑Level Drinking Fountain is a vandal‑resistant, non‑filtered, non‑refrigerated unit designed for durability in high‑traffic public environments. Featuring Flexi‑Guard® Safety Bubblers and ADA compliance, it provides safe, accessible hydration at two stations.
Key Installation Requirements:
- Wall‑mounted installation with proper in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Supply line pressure: 20–105 PSI (regulator required if above 105 PSI)
- Drain connection required for both fountain basins
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑filtered; optional retrofit filtration kits are available separately
- Always depressurize water line before servicing
- Outdoor installation requires winterization or protection in extreme climates
- Ensure proper drainage to avoid water damage from spillage
- Secure fountain firmly to wall structure to resist vandalism
Basic Installation Overview:
- Mount in‑wall carrier securely to support dual fountain weight
- Position fountain assembly and secure to wall structure
- Connect cold water supply line to inlet
- Connect drain lines from both basins to building drain system
- Pressurize system slowly and check for leaks
- Test bubbler stream height; adjust regulator if needed
- Install bottom cover plates and finish trim
For complete specifications and installation guidelines, download the official EDFPVR217C Spec Sheet and the Installation & Maintenance Manual.
Want to Order the EDFPVR217C Bi‑Level Vandal‑Resistant Fountain or Get a Custom Quote?
Shop EDFPVR217C Drinking Fountain