The Elkay EDFP217FPK Soft Sides® Bi‑Level In‑Wall Drinking Fountains are designed with freeze‑resistant protection for outdoor and unheated environments. Featuring vandal‑resistant construction and Flexi‑Guard® Safety Bubblers, they provide safe, accessible hydration at two stations.
Key Installation Requirements:
- In‑wall installation with proper carrier support
- Cold water line only (40–100°F operating temperature)
- Supply line pressure: 20–105 PSI (regulator required if above 105 PSI)
- Drain connection required for both fountain basins
- Freeze‑resistant valve box must be installed in a heated area
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑filtered and non‑refrigerated — delivers ambient water only
- Always depressurize water line before servicing
- Ensure freeze‑resistant valve box is properly insulated and accessible
- Outdoor installation requires proper drainage and winterization
- Secure fountains firmly to wall structure to resist vandalism
Basic Installation Overview:
- Install in‑wall carrier to support dual fountain weight
- Mount freeze‑resistant valve box in heated interior space
- Run supply line from valve box to fountain assembly
- Connect drain lines from both basins to building drain system
- Position fountain assembly and secure to wall structure
- Pressurize system slowly and check for leaks
- Test bubbler stream height; adjust regulator if needed
- Install cover plates and finish trim
For complete specifications and installation guidelines, download the official EDFP217FPK Spec Sheet and the Installation & Maintenance Manual.
Want to Order the EDFP217FPK Freeze‑Resistant Bi‑Level Drinking Fountains or Get a Custom Quote?
Shop EDFP217FPK Drinking Fountains