The Elkay EDFP214FPK is a freeze‑resistant, wall‑mounted Soft Sides® drinking fountain. Designed for outdoor use, this filterless unit delivers ambient water service with ADA‑compliant access and vandal‑resistant construction.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Freeze‑resistant valve box must be installed in a heated area
- Drain connection required for fountain basin
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is filterless — delivers ambient water only
- Always depressurize water line before servicing
- Ensure freeze‑resistant valve box is properly insulated and accessible
- Outdoor installation requires proper winterization procedures
- Secure fountain firmly to wall structure to resist vandalism
Basic Installation Overview:
- Install in‑wall carrier to support fountain weight
- Mount freeze‑resistant valve box in heated interior space
- Run supply line through wall to valve box; flush line thoroughly
- Position fountain assembly and secure to wall structure
- Connect cold water supply line to inlet
- Connect drain line from basin to building drain system
- Pressurize system slowly and check for leaks
- Test bubbler stream height; adjust regulator if needed
- Install cover plates and finish trim
For complete specifications and installation guidelines, download the official EDFP214FPK Spec Sheet and the Installation Manual.
Want to Order the EDFP214FPK Freeze‑Resistant Fountain or Get a Custom Quote?
Shop EDFP214FPK Drinking Fountain