Installation
- Cut wall opening to recommended dimensions (14‑1/2" wide × 19‑7/8" high × 3‑7/8" deep).
- Place unit into wall cavity, ensuring proper alignment and overlap to conceal irregularities.
- Secure dispenser to wall studs using flathead screws and a level for alignment.
- Connect water supply line with shut‑off valve; flush thoroughly before use.
- If available, install optional catch basin drain and connect to household waste line.
- Reinstall front panel and grate cover; verify proper dispensing and check for leaks.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Inspect orifice periodically; remove mineral deposits if water flow is irregular.
- Check quick‑connect fittings and tubing for leaks; reseat if necessary.
- Clean basin and exterior surfaces with mild, non‑abrasive cleaner.
- If available, service drain components to ensure proper waste flow.
- For service or repairs, consult the manual or a licensed technician.