The Elkay DXUH1318 is a Dayton® single bowl undermount bar sink designed for home bars, entertainment areas, prep stations, and compact kitchen applications. Constructed from durable stainless steel, it provides a clean undermount appearance while maximizing usable workspace in smaller sink installations.
Key Installation Requirements:
- Undermount installation beneath solid surface countertops
- Countertop cutout must match sink template dimensions
- Mounting clips and approved sealant required for secure installation
- Standard 3-1/2" drain opening accommodates common basket strainers and disposals
- Allow adequate space beneath the sink for plumbing connections
- Follow countertop manufacturer recommendations for undermount applications
Important Notes Before Installing:
- Inspect sink and countertop cutout dimensions before beginning installation
- Always support the sink properly during mounting procedures
- Apply approved silicone sealant to create a watertight connection
- Do not overtighten mounting clips or fasteners
- Verify drain component alignment before final tightening
- Check all plumbing connections for leaks after installation
Basic Installation Overview:
- Prepare the countertop cutout according to sink template specifications
- Clean mounting surfaces and apply silicone sealant around the sink rim
- Position the sink beneath the countertop opening and align properly
- Secure the sink using mounting clips and hardware
- Install the drain assembly and plumbing connections as required
- Allow sealant to cure according to manufacturer's recommendations
- Turn on the water supply and inspect for leaks
- Clean the sink and remove any excess sealant
For complete specifications and installation guidelines, download the official DXUH1318 Spec Sheet and the Installation Manual.
Want to Order the DXUH1318 Dayton® Undermount Bar Sink or Get a Custom Quote?
Shop DXUH1318 Dayton® Undermount Bar Sink