The Elkay DSSBF8SP is a floor‑standing, filtered bottle filling station designed for high‑traffic indoor environments. Featuring hands‑free sensor activation, it delivers chilled, filtered water with ADA‑compliant access and durable stainless steel construction.
Key Installation Requirements:
- Floor‑standing installation with secure anchoring to foundation
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connection required for bottle filler basin
- Maintain clearance for filter replacement and servicing
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing filter
- Ensure sensor lenses are unobstructed for accurate activation
- Use only genuine Elkay filters to maintain certification and performance
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to floor structure to resist vandalism
Basic Installation Overview:
- Prepare floor foundation and anchor unit securely
- Plumb water supply with service stop and union connection; flush line thoroughly
- Install filter head and cartridge into bracket, connect tubing per routing diagram
- Mount bottle filler assembly, ensuring wires and tubing are not pinched
- Connect drain line from basin to building drain system
- Wire electrical supply to grounded outlet; verify LCD bottle counter illuminates
- Test bottle filler sensor activation and flow rate; adjust regulator if needed
- Install bottom cover plates and tighten back panel screws
For complete specifications and installation guidelines, download the official DSSBF8SP Spec Sheet and the Installation Manual.
Want to Order the DSSBF8SP Bottle Filling Station or Get a Custom Quote?
Shop DSSBF8SP Bottle Filling Station