Installation
- Turn off the water supply before starting.
- Position the four clips on the frame flanges (flat side facing forward).
- Place the access panel frame into an 8" x 8" wall opening. Make sure the frame sits flush or no more than 7/8" behind the finished wall.
- Secure the frame to the wall through the mounting holes using appropriate fasteners (not included).
- Place the access panel over the frame and secure it with the four hex socket screws provided.
- Use an Allen wrench to tighten the screws (wrench not included).
- For detailed steps, refer to the installation manual provided in the package or contact a licensed installer.
Maintenance
- Check the panel regularly to ensure it remains secure and aligned.
- Clean the exterior with a soft cloth and mild cleaner.
- If the panel or screws become damaged, replace with genuine Elkay parts.
- For service or repairs, consult the manual or a licensed technician.