Installation
- Mount filter in a suitable location with water flow in the direction indicated on the cartridge.
- Connect cold water supply through a shut‑off valve and 1/4" O.D. tubing.
- Ensure tubing ends are square and free of burrs; push into fittings until fully seated.
- If supply pressure may exceed 100 psi, install a regulator to keep within 20–100 psi range.
- Turn on water supply and check for leaks; dispense water for 10 minutes to purge air and carbon particles.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Replace filter every 6 months or after 500 gallons of use, whichever comes first.
- Inspect fittings periodically for leaks and reseat tubing if necessary.
- Clean exterior surfaces with mild, non‑abrasive cleaner.
- For service or repairs, consult the manual or a licensed technician.