The Elkay 51600C is a high‑capacity WaterSentry® replacement filter designed for compatible Elkay bottle filling stations and drinking water systems. It helps reduce lead, chlorine taste and odor, particulates, and other contaminants while maintaining cleaner, better‑tasting drinking water.
Key Installation Requirements:
- Compatible with select Elkay WaterSentry filtration systems
- Replacement filter installation only; existing filter head required
- Cold water applications only
- Allow adequate clearance for filter removal and replacement
- Use genuine Elkay replacement filters for certified performance
- Follow filter reset procedures after installation, if applicable
Important Notes Before Installing:
- Always shut off the water supply before replacing the filter
- Depressurize the system prior to removing the existing cartridge
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
- Inspect O-rings and sealing surfaces during filter replacement
- Flush the new filter thoroughly before placing the unit into service
- Replace the filter according to capacity limits or filter monitor indications
Basic Replacement Overview:
- Shut off the water supply to the unit
- Remove the existing filter cartridge from the filter head
- Inspect the filter head and sealing surfaces for debris or damage
- Install the new 51600C cartridge according to the locking mechanism
- Turn the water supply back on and inspect for leaks
- Flush the filter until the water runs clear
- Reset the filter monitor if applicable
- Verify proper system operation and water flow
For complete specifications and installation guidelines, download the official 51600C Spec Sheet and the Installation Manual.
Want to Order the 51600C WaterSentry® Replacement Filter or Get a Custom Quote?
Shop 51600C WaterSentry® Replacement Filter