The Elkay 1000002435 Solenoid Valve & Regulator Assembly Kit is an OEM replacement part designed for Enhanced EZH2O® bottle filling stations and coolers. It ensures proper water flow control and valve regulation for reliable operation.
Key Installation Requirements:
- Disconnect electrical power before servicing the unit
- Shut off water supply prior to installation
- Mount solenoid valve and regulator assembly securely in designated location
- Connect 24V wiring harness to solenoid valve
- Attach regulator assembly to water line with proper fittings
- Verify seals and gaskets are seated to prevent leaks
Important Notes Before Installing:
- Designed for Enhanced EZH2O® models only; not compatible with standard units
- Professional installation recommended for service reliability
- Always depressurize system before disconnecting hoses
- Follow Elkay’s official service manual for your specific cooler/bottle filler model
Basic Installation Overview:
- Disconnect electrical power and shut off water supply
- Remove front panel to access valve/regulator assembly
- Disconnect old solenoid valve and regulator assembly from wiring and water lines
- Install new assembly, securing with provided fittings and screws
- Reconnect wiring harness and water lines
- Restore water supply and electrical power
- Test bottle filler/cooler to confirm proper operation
For complete step‑by‑step instructions, refer to the official Elkay Enhanced EZH2O® service manuals for your model.
Want to Order the 1000002435 or Get a Custom Quote?
Shop now at BottleFillingStations.com