Installation
A Licensed Contractor is required for installation per your local regulatory requirements.
Always disconnect the power source before servicing or installing the dryer.
Maintenance
Stainless Steel Cabinet:
1. Wipe or polish with the grain direction of satin finish.
2. Use mild cleaning solution or stainless steel cleaners.
3. Apply with sponge for smooth surfaces or a soft brush for textured surfaces.
4. Remove residues with a dry clean cloth.
5. Avoid cleaning products containing bleach, hydrochloric acids, or chlorides.
6. Avoid the use of steel wool.
Absorbent Ceramic Surface:
1. Wipe with soap and water.
2. Remove soap residues with a dry clean cloth.
3. Avoid cleaning with products containing bleach, hydrochloric acids, or chlorides.
4. Prevent stainless steel cleaner from making contact to avoid staining.
5. Avoid the use of any oily cleaners.
6. Avoid the use of steel wool, which can scratch the surface.
Inside Cabinet:
1. Turn off electrical power before maintenance.
2. Remove the cover at least once every 6 months.
3. Clean out dust and lint buildup with a small brush or vacuum.
4. Check motor brushes' length; if less than ½", replace.
5. Ensure correct installation and even wear of motor brushes.
6. Replace the cover and turn the power back on.