Zurn Z81000-XL | AquaSpec® 4" Centerset Single Control Lavatory Faucet | 2.2 GPM, Lead-Free, Chrome
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
The Zurn Z81000-XL single control lavatory faucet is a 4" centerset AquaSpec® faucet with a polished chrome-plated cast brass body. It has a ceramic disc cartridge with a temperature limit stop.
Key Specifications:
| Flow Rate | 2.2 GPM, aerator outlet |
| Operation | Manual, single control lever handle (ADA-compliant) |
| Connections | 1/2" NPSM coupling nuts for standard lavatory risers |
| Drain Options | 1-1/4" grid strainer (-G) or 1-1/4" pop-up (-P); pop-up hole plugged on base model |
| Compliance | Lead-free (SDWA 1417), NSF 61 & NSF 372, ASME A112.18.1/CSA B125.1, IPC, ADA/ICC A117.1 when installed per standards. |
Zurn Model Z81000-XL Features & Benefits:
- Ceramic Disc Cartridge: Gives smooth single-lever control, and a temperature limit stop caps the hot water temperature.
- Lead-Free Cast Brass Body: Polished chrome-plated cast brass with no more than 0.25% weighted average lead on wetted surfaces (SDWA 1417, NSF 372).
- ADA-Compliant Lever Handle: The single control lever meets ADA and ICC A117.1 requirements when installed to those standards.
- Standard Riser Fit: The 4" centerset and 1/2" NPSM coupling nuts connect directly to standard lavatory risers.
What's Included in the Zurn Z81000-XL:
- AquaSpec® 4" centerset single control faucet (polished chrome)
- Standard 2.2 GPM aerator
- ADA-compliant single control lever handle
- Mounting hardware
- 1/2" NPSM coupling nuts for standard lavatory risers
- Plugged pop-up hole (drain not included)
Variant Options
| SKU | Flow Rate | Vandal Resis. | Water Sense | Outlet Type |
|---|---|---|---|---|
| Z81000-XL-2M | 2.2 GPM | ✔️ | - | Aerator |
| Z81000-XL-17M | 1.5 GPM | ✔️ | ✔️ | Aerator |
| Z81000-XL-18M | 1.5 GPM | ✔️ | ✔️ | Laminar |
| Z81000-XL-7M | 1.0 GPM | - | ✔️ | Spray |
| Z81000-XL-3M | 0.5 GPM | ✔️ | - | Spray |
FAQ
Q: Is the Zurn Z81000-XL WaterSense Certified?
A: No, not at its standard 2.2 GPM flow rate. To meet WaterSense you need a labeled lower-flow variant, such as the Z81000-XL-17M (1.5 GPM aerator) or the Z81000-XL-18M (1.5 GPM laminar). For the lowest flow, see the Z81000-XL-3M (0.5 GPM spray). Every flow option is listed on the Z81000-XL Spec Sheet.
Q: What Warranty Does the Zurn Z81000-XL Have?
A: Zurn covers Zurn faucets for three years from the date of purchase, and decorative finishes for one year. The remedy is replacement of the defective part; labor is not covered. See the Z81000-XL Warranty for full terms.
Q: What Is the Replacement Cartridge Part Number for the Z81000-XL?
A: The ceramic mixing cartridge is part number 92842001. The single control handle assembly is G67917, and the aerator is G63505. Shop genuine Zurn faucet parts.
Q: What Should I Do If the Z81000-XL Handle Leaks?
A: Tighten the cartridge retaining nut until it's snug. Don't overtighten it.
Q: How Do I Adjust the Temperature Limit Stop on the Z81000-XL?
A: Remove the cartridge, then lift the red temperature limit ring off the mixing cartridge. Turn the ring clockwise to raise the maximum temperature or counterclockwise to lower it. Reseat the ring, reinstall the handle, and test. Full steps are in the Z81000-XL Installation Manual.
Q: Why Is the Flow Weak or Uneven on My Z81000-XL?
A: The aerator is most likely clogged. Remove it and clean it. This is common right after installation, when debris is still in the lines.
Q: What Is the Maximum Water Pressure for the Z81000-XL?
A: The maximum working pressure is 125 PSI.
Q: How Should I Clean the Z81000-XL Chrome Finish?
A: Use soap and water or a mild cleaner that's safe for chrome plating. Don't use acids or toilet bowl cleaner, because they damage the finish. The ceramic cartridge needs no maintenance.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us now
The Zurn Z81000-XL is a 4" centerset single control lavatory faucet that mounts through pre-drilled sink holes and connects to standard lavatory risers. Professional installation by a licensed plumber is recommended.
Key Installation Requirements:
- Sink with pre-drilled 4" centerset faucet holes
- Hot and cold lavatory supply lines (not included)
- 1/2" NPSM coupling nuts for standard lavatory risers (included)
- Maximum water pressure of 125 PSI
- 1-1/4" grid strainer (-G) or pop-up drain (-P) available as optional suffixes (standard unit ships with pop-up hole plugged)
Important Notes Before Installing the Z81000-XL:
- The pop-up hole comes plugged on the standard Z81000-XL. Order the factory-configured model with the -G (1-1/4" grid strainer) or -P (1-1/4" pop-up) suffix if a drain is required.
- Flush the supply lines before connecting. The aerator may need cleaning at startup.
- Set the red temperature limit ring on the ceramic cartridge to cap the maximum hot water temperature.
- Use only genuine Zurn replacement parts for service.
- Always refer to the official Zurn Z81000-XL Spec Sheet for flow options, drain options, and compliance details.
Basic Installation Overview:
- Shut off the hot and cold water supply.
- Insert the faucet shanks through the pre-drilled sink holes and secure with the included mounting hardware.
- Connect the lavatory supply lines to the shanks using the 1/2" NPSM coupling nuts.
- Install the drain assembly, if used.
- Turn on the water, check all connections for leaks, and flush the lines.
- Remove and clean the aerator if flow is clogged or deflected, then reinstall it and test the maximum temperature.
For complete step-by-step instructions, download the official Zurn Z81000-XL Installation Manual
Want to Order the Z81000-XL or Get a Custom Quote?
Shop now at BottleFillingStations.com




