Elkay EZWSR | ezH2O Bottle Filler Component | 1.5 GPM
Elkay EZWSR | ezH2O Bottle Filler Component | 1.5 GPM is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Elkay EZWSR | ezH2O Bottle Filler Component | 1.5 GPM
The Elkay EZWSR ezH2O Bottle Filler Component adds touchless, sensor-activated bottle filling to compatible Elkay water cooler units.
Key Specifications:
| Product Type | Replacement Bottle Filler Assembly (Component Only, Not a Complete Unit) |
| What's Included | Bottle Filler Only |
| Activation | Touchless, Sensor-Activated |
| Fill Rate | 1.5 GPM with Laminar Flow |
| Compatible Model | ezH2O Combo Units. See Available Models |
Why Choose the Elkay EZWSR (ezH2O Bottle Filler Component)?
- Touchless Operation: Sensor activation supports hands-free, more hygienic bottle filling for every user.
- Smooth, Splash-Reducing Flow: Laminar flow delivers a steady stream that fills bottles quickly at 1.5 GPM.
- Sustainability Tracking: The Green Ticker counter shows how many disposable bottles have been saved, which encourages reusable bottle use.
- Hygiene and Drainage: Antimicrobial protection and the Real Drain system help keep the fill area cleaner.
Looking for the Complete Unit Instead?
FAQ
Q: Is the Elkay EZWSR a complete water cooler or bottle filling station?
A: No. It is a replacement bottle filler component intended for compatible Elkay water cooler and bottle-filling station combination units.
Q: How does the automatic shut-off work?
A: The sensor-activated filler stops dispensing automatically after 20 seconds, which helps limit overflow and wasted water.
Q: Can this component be installed on any water cooler?
A: It is designed for compatible Elkay water cooler combination units. Confirm that your unit is compatible before ordering.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Elkay EZWSR ezH2O Bottle Filler Component adds touchless, sensor-activated bottle filling to a compatible Elkay water cooler. It is a bottle filler only, not a complete unit, and it is for indoor use only.
Before You Begin
- Tools needed: Safety glasses, gloves, 3/4" wrench or crescent wrench, 5/16" nut driver, utility knife, tape measure, pencil, center punch, 1/2" socket and ratchet wrench, and 5/32" and 7/64" Allen wrenches. Mounting bolts for the wall plate are not included, so use fasteners suited to your wall type.
- Safety first: Installation must comply with all applicable plumbing and electrical codes. Use a cold water line only, with a maximum inlet water temperature of 100°F (38°C). If your supply pressure could exceed 100 psi, install a pressure regulator to keep it at or below 100 psi. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Compatibility: Confirm that your Elkay cooler is compatible before you begin. Coolers with model numbers ending in 1, 1A, 2 or 3 must be removed from the wall for this installation and follow alternate steps in the owner's manual.
- Power and drainage: Any drain fittings you supply should be plastic, to electrically isolate the fountain from the building plumbing. A ground fault circuit interrupter (GFCI) is recommended for the cooler and bottle filler.
- Wall support: The wall mounting plate must be supported securely. If the wall cannot provide adequate support, add a fixture support carrier.
Step-by-Step Installation Guide
- Turn off power and water, then unplug the cooler. Remove the lower front panel and the basin assembly, disconnecting the water line, drain, and push bar wires. On bi-level coolers, do this on both units. Coolers ending in 1, 1A, 2 or 3 must come off the wall first.
- Pressurize the water system with the supplied tubing, union, and tee, as shown in the owner's manual. On bi-level coolers, cut poly tube "H" and insert the supplied tee instead. Mount the optional filter head now if you are using one.
- Move the bubbler to the new basin and reassemble the basin and shroud. Reinstall the basin, then reconnect the water line, push bar wires, and drain.
- Remove the bottle filler's top cover and wall plate. Mark the six mounting holes on the wall, anchor the plate, then feed the power cord and water line through the gasket and cooler top. Set the bottle filler on the plate tabs and refit the top cover.
- Connect the bottle filler's 3/8" water line to the tee inside the cooler, with the insulation on. Install the filter cartridge if you are using one.
- Turn on the water and check for leaks. Plug in the unit and restore power, then confirm the green LED lights up and water dispenses when you put a cup in front of the sensor. Reinstall the lower front panel.
Looking for the Elkay EZWSR ezH2O Bottle Filler Component?
