Elkay MPW200 | Bi-level In-Wall Drinking Fountain Mounting Plate | Heavy-Duty, 500 lb Capacity
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Elkay MPW200 | Bi-level In-Wall Drinking Fountain Mounting Plate | ...
The Elkay MPW200 in-wall mounting plate is a universal drinking fountain mounting plate that adds hidden support for bi-level on-wall non-refrigerated water fountains. It mounts directly to wall studs, or pairs with optional Elkay ML100 mounting legs (sold separately) for an adjustable-height installation.
Key Specifications:
| Compatibility | Bi-level on-wall non-refrigerated fountains, including Soft Sides®, SwirlFlo®, OVL II™, HDFF and HRF series |
| Mounting Options | Installs directly to wall studs or with ML100 support legs; flips for standard (high/low) or reverse (low/high) setup |
| Load Capacity | Supports up to 500 lbs |
| Dimensions | 35-7/8" L x 1/4" W x 14" H |
| Material & Finish | Heavy-gauge galvanized steel, black finish |
Elkay Model MPW200 Features & Benefits:
- Universal Bi-Level Support: The universal design adds solid in-wall support for bi-level drinking fountains, keeping both basins secure and level for years of daily use.
- Adjustable ADA Mounting Height: An adjustable height setting lets installers set the fountain for adult or child ADA installation, ideal for schools, offices and public facilities.
- Reversible High/Low Setup: Flip the plate to mount the fountain in the standard high/low or reverse low/high configuration to suit the room layout.
- Heavy-Duty Steel Construction: Heavy-gauge galvanized steel rated to 500 lbs secures to a variety of load-bearing surfaces for a stable, long-lasting installation.
- Built in the USA: Made in America by Elkay, a trusted name in commercial drinking water products for over 100 years.
What's Included in the Elkay MPW200:
- In-wall mounting plate (1)
- 5/16-18 threaded rods, 6" (8)
- 5/16-18 hex nuts (32)
- Flat washers (36)
FAQ
Q: Can the Elkay MPW200 Be Used With Bi-Level Bottle Fillers or Refrigerated Coolers?
A: No. The MPW200 is designed only for bi-level on-wall non-refrigerated fountains. For bi-level on-wall bottle fillers, coolers and fountains such as the EZ, LZ, EMABF and VRC series, use the Elkay MLP200 Bi-Level In-Wall Carrier.
Q: Is the Hardware to Fasten the Mounting Plate to Wall Studs Included?
A: No. Per the installation manual, the 3/8" hardware used to secure the plate to wall studs is supplied by others, so plan to source it before installation day.
Q: What Warranty Comes With the Elkay MPW200?
A: Elkay covers accessories against defects in materials and workmanship for 1 year from installation or 18 months from factory shipment, whichever comes first, when installed per Elkay's instructions. See the full warranty for details.
Q: Should the MPW200 Be Installed by a Professional?
A: Yes. Elkay states that all service should be performed by an authorized service person and that installations must comply with plumbing, electrical and other applicable codes.
Q: Where Do I Find Water, Waste and Electrical Rough-In Locations?
A: The MPW200 installation manual shows plate placement for each fountain series. Supply, waste and electrical locations are listed in the installation manual for your specific fountain.
Q: If I Use the ML100 Support Legs, Are U-Bolts Included?
A: Yes. The manual notes that U-bolts come with the Elkay ML100 support legs, not with the MPW200.
Q: Do the Threaded Rods Need to Be Trimmed After Installation?
A: They may. Elkay notes that threaded rods, and U-bolts when used with ML100 legs, may need to be trimmed after the fountain is installed.
Q: Does the Elkay MPW200 Require Electricity?
A: No. The MPW200 is a structural mounting plate and requires no electrical connection.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us now
The Elkay MPW200 In-Wall Mounting Plate installs behind the finished wall to support bi-level on-wall non-refrigerated drinking fountains. It can be fastened directly to wall studs or used with optional ML100 support legs.
Key Installation Requirements:
- Compatible Fountain: Bi-level on-wall non-refrigerated models, including Soft Sides®, SwirlFlo®, OVL II™, HDFF and HRF series
- Mounting Method: Direct to wall studs, or with Elkay ML100 support legs (sold separately)
- Stud Hardware: 3/8" mounting hardware for direct-to-stud installs (supplied by others)
- Included Hardware: Eight 5/16-18 x 6" threaded rods with hex nuts and flat washers
- Fountain Manual: Required for water supply, waste and electrical locations
Important Notes Before Installing:
- All installation and service should be performed by an authorized service person.
- Check the installation for compliance with plumbing, electrical and other applicable codes.
- Read the full instructions before starting and keep them for future reference.
- Check that all parts on the parts list were received before beginning.
- U-bolts are included with the ML100 support legs, not with the MPW200.
- Threaded rods, and U-bolts when used, may need to be trimmed after installation.
Basic Installation Overview:
- Confirm the configuration: Choose the standard high/low or reverse low/high layout. Flip the plate for the reverse configuration.
- Prepare the support: Locate the wall studs, or install the ML100 support legs per their instructions.
- Position the plate: Place the plate behind the finished wall using the dimensions shown in the manual for your fountain series.
- Secure the plate: Fasten it to the studs with 3/8" hardware, or to the ML100 legs with the supplied U-bolts.
- Install the threaded rods: Thread the rods into the plate's mounting holes for your fountain series.
- Mount the fountain: Hang the fountain on the rods, secure it with the washers and nuts, then complete the plumbing per the fountain's manual.
- Trim and finish: Trim the threaded rods or U-bolts as needed.
For detailed diagrams and dimensions, view the Elkay MPW200 Installation Manual.
Want to Order the Elkay MPW200 In-Wall Mounting Plate?
Shop the Elkay MPW200
