Wilkins 1-975XL2SEU | Reduced Pressure Backflow Preventer, 1"
Wilkins 1-975XL2SEU | Reduced Pressure Backflow Preventer, 1" is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 1-975XL2SEU | Reduced Pressure Backflow Preventer, 1"
The Wilkins 1-975XL2SEU is a reduced pressure principle backflow prevention assembly designed to protect potable water supplies from contamination. This 1 Inch assembly features street elbows and union ball valves for flexible installation in health hazard applications.
Key Specifications:
- Size: 1 Inches
- Maximum Working Water Pressure: 175 PSI
- Maximum Working Water Temperature: 180°F
- Notable Certifications: ASSE 1013, cUPC, CSA B64.4
- End Connections: Threaded ANSI B1.20.1
Other Related Variants:
- 34-975XL2SEU: 3/4 Inches model size
- 112-975XL2SEU: 1 1/4 Inches model size
- 114-975XL2SEU: 1 1/2 Inches model size
- 2-975XL2SEU: 2 Inches model size
Materials:
- Main valve body: Low Lead Cast Bronze ASTM B584
- Access covers: Low Lead Cast Bronze ASTM B584
- Fasteners: 300 Series Stainless Steel
- Elastomers: Silicone and Buna Nitrile
- Polymers: Noryl™
- Springs: 300 Series Stainless Steel
- Ball valve handles: Stainless Steel
Typical Installation:
Local codes shall govern installation requirements. The Zurn 1-975XL2SEU must be installed in accordance with the manufacturer's instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12 Inches and a maximum of 30 Inches above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged. For indoor installations, an air gap fitting is required.
Standards Compliance:
ASSE 1013; cUPC Listed; CSA B64.4; AWWA C511; UL/C-UL Classified; NSF/ANSI/CAN 61 & 372; Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
Features & Benefits:
- Health Hazard Protection: Provides protection against both backsiphonage and backpressure where a potential health hazard exists in potable water lines.
- Lead-Free Compliance: Meets NSF/ANSI/CAN 61 and 372 standards with less than 0.25% weighted average lead content for safe drinking water applications.
- Easy Maintenance Access: First and second checks are accessible for maintenance without removing the relief valve or entire device from the line.
- Durable Construction: Low lead cast bronze body with 300 series stainless steel components and silicone elastomers ensures long-lasting performance rated to 175 PSI and 180°F.
FAQ
Q: What is the installation height requirement for the Zurn 1-975XL2SEU?
A: The assembly must be mounted at a minimum of 12 Inches and a maximum of 30 Inches above adequate drains with sufficient side clearance for testing and maintenance.
Q: What type of connections does this backflow preventer have?
A: The 1-975XL2SEU features threaded end connections per ANSI B1.20.1 standards with the SE option providing street elbows and U option providing union ball valves.
Q: Can this backflow preventer be installed outdoors?
A: Yes, the assembly can be installed outdoors in a protective enclosure. However, indoor installations require an air gap adapter to be supplied with the installation.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
