Wilkins TP220-5C-150C | T&P Relief Valve, 5" Probe, 150 PSI
Wilkins TP220-5C-150C | T&P Relief Valve, 5" Probe, 150 PSI is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins TP220-5C-150C | T&P Relief Valve, 5" Probe, 150 PSI
The Wilkins TP220-5C-150C is a temperature and pressure relief valve designed for water heater protection with a 5-inch probe and 150 PSI pressure setting.
Key Specifications:
- Probe Size: 5 Inches
- Pressure Relief Setting: 150 PSI
- Temperature Relief Rating: 210°F
- Notable Certifications: ANSI Z21.22, ASME Section IV
- Connection Type: 3/4" MNPT Inlet, 3/4" FNPT Outlet
Other Related Variants:
- TP220-5C-125C: 125 PSI pressure setting
- TP1100AE-3C-150C: Extended body, 3" probe
- TP3000-5C-150C: 1" FNPT connections, higher capacity
Materials:
- Main valve body: Cast Brass or Bronze (ASTM B 584)
- Internals: Stainless Steel (300 Series)
- Internals: Brass (ASTM B 36 and B 16)
- Springs: Stainless Steel (ASTM A 313)
- Probe: Epoxy-coated copper tube (FDA approved)
- Seals: EP, Silicone
Typical Installation:
Local codes shall govern installation requirements. Unless otherwise specified, the relief valve shall be installed in accordance with manufacturer's instructions and the latest edition of the Uniform Plumbing Code. The valve is typically installed on hot water heaters with an adequate drain line terminating outside. Maximum 6 inches above water heater installation recommended.
Standards Compliance:
CSA Compliant to ANSI Z21.22/CSA 4.4; Certified to ASME Section IV by National Board
Features & Benefits:
- Dual Protection: Provides both temperature and pressure relief for comprehensive water heater safety against over-temperature and excessive pressure conditions.
- High Discharge Capacity: Delivers 205,000 BTU/hr (ANSI Z21.22) and 1,912,000 BTU/hr (ASME) discharge rates for reliable protection in demanding applications.
- Durable Construction: Features cast brass or bronze body with stainless steel internals and FDA-approved epoxy-coated copper probe for long-lasting performance.
- Certified Safety: Meets rigorous ANSI Z21.22/CSA 4.4 and ASME Section IV standards, certified by National Board for assured code compliance.
FAQ
Q: What is the difference between the Zurn TP220-5C-150C and the TP220-5C-125C model?
A: The primary difference is the pressure relief setting. The Zurn TP220-5C-150C relieves at 150 PSI while the TP220-5C-125C relieves at 125 PSI. Both feature a 5-inch probe and 210°F temperature relief.
Q: Where should the discharge drain line terminate?
A: The drain line must terminate outside in a safe location where discharge will not cause injury or property damage. Follow local plumbing codes and manufacturer's instructions for proper installation.
Q: Can this valve be used for steam service applications?
A: No, the TP220-5C-150C is designed exclusively for installation on water heating storage vessels and is not suitable for steam service applications.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
