Wilkins TP1100AE-3C-150C | T&P Relief Valve, 3" Probe, 150 PSI
Wilkins TP1100AE-3C-150C | T&P Relief Valve, 3" Probe, 150 PSI is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins TP1100AE-3C-150C | T&P Relief Valve, 3" Probe, 150...
NOTICE: Product images may vary from the actual item due to differences in size or configuration options.
The Wilkins TP1100AE-3C-150C is a temperature and pressure relief valve designed to protect water heating storage vessels from over-temperature and excessive pressure conditions.
Key Specifications:
- Probe Size: 3 Inches
- Pressure Relief Setting: 150 PSI
- Temperature Relief Rating: 210°F
- Notable Certifications: ANSI Z21.22, ASME Section IV
- End Connections: 3/4" MNPT Inlet, 3/4" FNPT Outlet
Other Related Variants:
- TP1100A-4C-150C: 4 Inches probe version
- TP1100A-8C-150C: 8 Inches probe version
- TP220-5C-150C: Higher capacity model with 5 Inches probe
- TP3000-5C-150C: High capacity model with 1 Inch connections
Materials:
- Main Valve Body: Cast Brass or Bronze (ASTM B 584)
- Internals: Stainless Steel (300 Series)
- Internals: Brass (ASTM B 36 and B 16)
- Springs: Stainless Steel (ASTM A 313)
- Probe: Epoxy Coated Copper Tube (FDA Approved)
Typical Installation:
Local codes shall govern installation requirements. Unless otherwise specified, the relief valve shall be installed in accordance with manufacturer's instructions and the latest edition of the Uniform Plumbing Code. Install on water heater with adequate, safe drain line terminating outside.
Standards Compliance:
CSA Compliant to ANSI Z21.22/CSA 4.4; Certified to ASME Section IV by National Board
Features & Benefits:
- Dual Protection: Provides both temperature and pressure relief in a single valve for comprehensive water heater protection.
- High Discharge Capacity: Delivers 105,000 BTU/hr (ANSI Z21.22) and 500,000 BTU/hr (ASME) discharge rates for effective thermal energy dissipation.
- Durable Construction: Features cast brass or bronze body with stainless steel internals for long-lasting performance and corrosion resistance.
- Extended Body Design: The Zurn TP1100AE-3C-150C includes 2.1 inch extended shank for flexible installation configurations on various water heater models.
FAQ
Q: What is the difference between the Wilkins TP1100AE-3C-150C and standard TP1100A models?
A: The TP1100AE features an extended body design with a 2.1 inch shank, providing additional reach for specific installation requirements where standard models may not fit properly.
Q: What size drain line is required for the Zurn TP1100AE-3C-150C?
A: The discharge outlet is 3/4 inch FNPT. The drain line must be adequate to handle the discharge capacity and must terminate safely outside the building per local codes.
Q: Can this valve be used for steam service applications?
A: No, this valve is designed exclusively for water heating storage vessels and is not suitable for steam service applications.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
