Wilkins 2-375XLFT | Reduced Pressure Principle Backflow Preventer, 2 Inches
Wilkins 2-375XLFT | Reduced Pressure Principle Backflow Preventer, 2 Inches is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 2-375XLFT | Reduced Pressure Principle Backflow Preventer, ...
NOTICE: Product images may vary from the actual item due to differences in size or configuration options.
The Wilkins 2-375XLFT is a reduced pressure principle backflow preventer designed to protect potable water supplies from contamination in both backsiphonage and backpressure conditions.
Key Specifications:
- Size: 2 Inches
- Maximum Working Water Pressure: 175 psi
- Maximum Working Water Temperature: 180°F
- Notable Certifications: ASSE 1013, cUPC, CSA B64.4
- End Connections: Threaded FNPT
Other Related Variants:
- 12-375XLFT: 1/2 Inches model size
- 34-375XLFT: 3/4 Inches model size
- 1-375XLFT: 1 Inches model size
- 112-375XLFT: 1 1/2 Inches model size
Materials:
- Housing: Reinforced Nylon (FDA Approved)
- Fasteners: Stainless Steel (300 Series)
- Ball Valves: Low Lead Cast Bronze (ASTM B 584)
- Elastomers: Silicone (FDA Approved)
- Elastomers: Buna Nitrile (FDA Approved)
- Internals: Delrin
- Internals: Nylon
- Springs: Stainless Steel (300 Series)
- Struts: Stainless Steel (300 Series)
Typical Installation:
Local codes shall govern installation requirements. To be installed in accordance with the manufacturers' instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12 inches (305mm) and a maximum of 30 inches (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged. If installed indoors, the installation shall be supplied with an air gap adapter.
Standards Compliance:
ASSE 1013; cUPC; CSA B64.4; AWWA C511; USC Foundation Approved; NSF/ANSI/CAN 61 & 372
Features & Benefits:
- Lead-Free Compliance: Meets NSF/ANSI/CAN 372 with less than 0.25% weighted average lead content, ideal for potable water applications.
- Maximum Protection: The Zurn 2-375XLFT provides protection against both backsiphonage and backpressure where potential health hazards exist.
- Integrated Test Fitting: Features integral male 45° flare SAE test fitting for convenient testing and maintenance procedures.
- Durable Construction: Reinforced nylon housing with stainless steel components ensures long-lasting performance and reliability.
FAQ
Q: What is the maximum working pressure for the Zurn 2-375XLFT?
A: The maximum working water pressure is 175 psi, with a hydrostatic test pressure rating of 350 psi.
Q: What are the installation height requirements for this backflow preventer?
A: The assembly must be mounted at a minimum of 12 inches and a maximum of 30 inches above adequate floor drains with sufficient side clearance for testing and maintenance.
Q: Is an air gap adapter required for indoor installations?
A: Yes, if the unit is installed indoors, an air gap adapter is required to ensure proper protection and drainage.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
