Elkay VRC8S | Wall-mount VRC-style Drinking Fountain | Filterless, Refrigerated, Fully Vandal-resistant
Elkay VRC8S | Wall-mount VRC-style Drinking Fountain | Filterless, Refrigerated, Fully Vandal-resistant is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Elkay VRC8S | Wall-mount VRC-style Drinking Fountain | Filterless, ...
The Elkay VRC8S is a wall‑mounted vandal‑resistant ADA cooler, designed for both indoor and outdoor installation. This stainless steel unit delivers 8.0 GPH of chilled water through a mechanical front bubbler button, making it ideal for schools, parks, offices, and public facilities that require durability, accessibility, and reliable performance.
Key Specifications:
| Design | Wall‑mounted ADA cooler, single‑station with mechanical front bubbler pushbutton |
| Finish | Stainless Steel |
| Filtration | Non‑filtered model. For filtered performance, see the LVRC8S. Retrofit available with the EWF172 WaterSentry® VII Filter Kit. |
| Refrigeration | 8.0 GPH of 50°F drinking water (based on 80°F inlet and 90°F ambient) |
| Stations Served | 1 (single drinking fountain) |
Features & Benefits:
- Reliable Cooling: Provides 8.0 GPH of chilled water at 50°F, even under heavy use.
- Vandal Resistance: Heavy‑duty bubbler and reinforced stainless steel construction withstand tampering and abuse.
- Mechanical Activation: Ensures water delivery even during power interruptions.
- ADA Compliant: Barrier‑free design meets ADA & ICC A117.1 accessibility standards.
- Outdoor Ready: Suitable for outdoor use when properly winterized or protected from extreme climates.
What's Included:
- VRC8S vandal‑resistant ADA cooler unit
- Vandal‑resistant bubbler
- Wall mounting plate and hardware
- Installation instructions
Comparison of Elkay Vandal‑Resistant ADA Coolers:
| Feature | VRC8S | LVRC8S | LVRCGRN8 |
|---|---|---|---|
| Finish | Stainless Steel | Stainless Steel | Stainless Steel |
| Filtration | Non‑filtered (retrofit available with EWF172 Filter Kit) | Filtered, NSF/ANSI certified for lead, microplastics, chlorine, particulates, cysts | Filtered, NSF/ANSI certified with energy‑saving mode |
| Best For | Schools, parks, and public facilities needing vandal‑resistant hydration | Facilities requiring vandal‑resistant coolers with integrated filtration | Indoor environments needing high‑efficiency filtration and energy savings |
| Features | Vandal‑resistant bubbler, mechanical activation, ADA compliant | Filtered + vandal‑resistant design, ADA compliant | High‑efficiency cooling, StreamSaver™ bubbler, ADA compliant |
| Activation | Mechanical front bubbler pushbutton | Mechanical front bubbler pushbutton | Mechanical front bubbler pushbutton |
How to Install the VRC8S:
- Mount the hanger bracket: Securely fasten to the wall using all five designated bolt holes. Ensure proper support.
- Hang the cooler: Engage the cooler slots onto the hanger bracket.
- Connect the water supply: Attach the 3/8" O.D. copper tube shut‑off valve to the inlet line.
- Install the trap: Fit the slip nut and gasket onto the waste line, ensuring a tight seal.
- Adjust stream height: Factory set at 45–50 PSI. Use the pushbutton access hole to fine‑tune the stream so it hits the basin ~6‑1/2" from the bubbler.
How to Maintain the VRC8S:
- Inspect the bubbler: Check regularly for wear or damage. Replace with vandal‑resistant kit if needed.
- Clean the stainless steel panels: Use mild soap and water; avoid abrasive cleaners.
- Check the trap and drain: Ensure no leaks or blockages in the waste line.
- Test stream height: Adjust as necessary to maintain proper flow.
- Service components: Only authorized service personnel should perform electrical or refrigeration maintenance.
FAQ
Q: What Warranty Does the VRC8S Include?
A: The VRC8S includes a 5‑year limited warranty on the refrigeration system and a 12‑month warranty on electrical components and the water system. Warranty applies to drinking water applications only.
Q: Does the VRC8S Include Filtration?
A: No. The VRC8S is a non‑filtered model. For filtered performance, see the LVRC8S. Filtration can also be added later using the EWF172 WaterSentry® VII Filter Kit.
Q: What Makes the VRC8S Vandal Resistant?
A: The VRC8S features a heavy‑duty vandal‑resistant bubbler, reinforced stainless steel panels, and tamper‑resistant fastenings, making it ideal for high‑traffic public environments.
Q: Is the VRC8S ADA Compliant?
A: Yes. The VRC8S meets ADA & ICC A117.1 accessibility standards when installed at the proper height.
Q: What Accessories Are Available for the VRC8S?
A: Recommended accessories include the MLP100 In‑Wall Carrier for secure installation, the 98324C Cane Apron for ADA compliance, and the 98481C StreamSaver™ Vandal‑Resistant Bubbler Kit for water‑efficient performance.
Q: How Does the VRC8S Differ From Other Elkay ADA Coolers?
A: The VRC8S is a non‑filtered vandal‑resistant cooler. The LVRC8S adds filtration, while the LVRCGRN8 adds both filtration and high‑efficiency energy‑saving features.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact Us Now
The Elkay VRC8S Single‑Level Drinking Fountain is a vandal‑resistant, wall‑mounted cooler designed for heavy‑duty commercial use. It provides reliable hydration with a barrier‑free ADA compliant design and durable stainless steel construction.
Key Installation Requirements:
- Wall‑mounted installation with hanger bracket support
- Cold water line only (40–100°F operating temperature)
- Water supply line: 3/8" O.D. copper tube with shut‑off valve (not included)
- Drain connection: 1‑1/4" O.D. trap (not included)
- Electrical supply: 115V / 60Hz with dedicated GFCI circuit recommended
- Maintain 6" clearance from cabinet louvers to wall for ventilation
- Allow proper clearance for service and maintenance
Important Notes Before Installing:
- Do not connect to hot water line.
- Stream height is factory set for 45–50 PSI; adjust if supply pressure varies.
- Certified ADA compliant when installed at proper height.
- All service should be performed by authorized personnel.
- Always refer to the official Elkay VRC8S Spec Sheet for detailed specifications and compliance information.
Basic Installation Overview:
- Remove hanger bracket from cooler and mount securely to wall using all bolt holes.
- Hang cooler on bracket, ensuring proper engagement with slots on the back.
- Connect water inlet line to shut‑off valve and 3/8" tubing.
- Install 1‑1/4" trap to drain line and tighten securely.
- Plug unit into grounded GFCI electrical outlet.
- Adjust stream height screw via pushbutton access hole if needed to match supply pressure.
- Reinstall front panel and confirm proper operation.
For complete step‑by‑step instructions, download the official Elkay VRC Series Installation & Maintenance Manual
Want to Order the VRC8S or Get a Custom Quote?
Shop now at BottleFillingStations.com
