Installation
To install the Elkay 51300C WaterSentry filter, a licensed plumber should perform the installation. Make sure the filter is placed in a location where it will not freeze. Follow these steps:
- Disconnect the power to the unit to avoid the risk of electric shock.
- Securely mount the filter head to the provided bracket, ensuring the filter cartridge will be positioned above the head.
- Connect the water inlet and outlet tubes to the filter head.
- Shut off the water supply before starting the installation to prevent leaks.
- If replacing an old filter, turn it ¼ turn to the left to remove it.
- Insert the new filter into the filter head and turn it ¼ turn to the right until it locks into place, with the front label clearly visible.
- Turn the water supply back on.
- Flush the system by dispensing water for 10 minutes to remove any air and fine carbon particles.
Maintenance
The Elkay 51300C WaterSentry filter operates within a water pressure range of 20 to 105 psi and a temperature range of 40 to 100°F. Regular maintenance is essential for optimal performance. Follow these steps:
- Replace the filter after 3,000 gallons of use or 1 year, whichever comes first.
- Flush the system by dispensing water for 10 minutes after replacing the filter.
- Regularly inspect the system for any leaks in the water connections and ensure the water pressure is within the acceptable range.
- Clean the exterior of the unit with a soft cloth and mild detergent, avoiding abrasive cleaners.
- If installed in an area prone to freezing, winterize the unit to protect the filter from damage.
Refer to the product manual for detailed installation and maintenance tips.