Buying more than 2? Email us for a discount: support@bottlefillingstations.com

FREE SHIPPING

All Products. No Minimums. 

How to Install Elkay & Halsey Taylor
Outdoor Bottle Filling Stations

Learn how to install Elkay and Halsey Taylor outdoor bottle filling stations, connect the water supply and drain, secure the unit, and maintain it for reliable outdoor use.

Installation Guide

Follow these steps to install your freestanding outdoor bottle filling station correctly.

Before Installation

Use a smooth, flat, finished surface capable of supporting at least 300 lbs. Protect the unit from extreme temperatures. Installation should be completed by a licensed plumber, with a shut-off valve added to the water supply.

Review the Rough-In

Refer to the product rough-in drawing before positioning plumbing and anchoring points.

Secure the Unit

Anchor the unit to the finished surface using 3/8-inch fasteners. Fasteners are not included.

Connect Water and Drain

Follow local codes. Use 3/8-inch O.D. unplated copper tubing for the water supply and 1-1/2-inch IPS for waste.

Flush the Supply Lines

Flush debris from the copper lines before connecting. Push tubes straight into the fittings without soldering.

Position and Finish

Position the drain pipe and aesthetic collar correctly, then secure the bottle filler using the provided hardware.

Need an Outdoor Bottle Filling Station?

Shop durable Elkay and Halsey Taylor outdoor models for parks, schools, and public spaces.

Buy Now – Outdoor Water Fountains

Need bulk pricing?

Maintenance

Follow these care recommendations to keep your unit performing properly.

Pressure

Ensure the water inlet pressure is between 20-105 PSI. Use a pressure-reducing regulator if it exceeds 105 PSI.

Winterize

Winterize the unit if it’s in a non-temperature-controlled environment.

Flush

Flush the supply lines regularly to prevent sediment buildup.

Clean

Clean the exterior regularly with a soft cloth and mild detergent. Avoid abrasive cleaners.

Inspect

Inspect water connections for leaks regularly.

Need Outdoor Bottle Fillers?

Order reliable outdoor bottle filling stations built for high-traffic environments.

Order Outdoor Bottle Fillters

Frequently Asked Questions

Place the unit on a smooth, flat, finished surface capable of supporting at least 300 pounds. Follow the model-specific rough-in dimensions, position the plumbing correctly, secure the station with suitable 3/8-inch fasteners, and connect the water supply and drain lines according to local plumbing codes. Installation should be completed by a licensed plumber.

Elkay and Halsey Taylor freestanding outdoor bottle filling stations require a smooth, level, finished mounting surface that can support a minimum of 300 pounds. The mounting location should also provide suitable access to the water supply, waste line, and required fastener points.

The installation requires a 3/8-inch O.D. unplated copper tube for the water supply and a 1-1/2-inch IPS waste connection. A shut-off valve must also be installed on the incoming water supply. Always refer to the specific product rough-in and comply with local plumbing codes.

Position the drain pipe and aesthetic collar according to the product rough-in, align the station with the mounting points, and secure it using appropriate 3/8-inch fasteners. The fasteners are not included, so select hardware that is suitable for the mounting surface and outdoor conditions.

Yes. Flush the copper supply lines before connecting them to the bottle filling station to remove sediment and installation debris. Push the tubing straight into the fittings and do not solder the tubing while it is connected to the unit

A licensed plumber should perform the installation because the unit requires water-supply, drain, pressure, mounting, and local-code considerations. Professional installation also helps reduce the risk of leaks, drainage problems, or damage caused by incorrect connections.

The water inlet pressure should remain between 20 and 105 PSI. Install a pressure-reducing regulator when the incoming pressure exceeds 105 PSI to help protect the unit and maintain dependable operation.

Clean the exterior with a soft cloth and mild detergent, inspect the water connections for leaks, and flush the supply lines to reduce sediment buildup. Avoid abrasive cleaners that could damage the finish.

Yes, if the station is installed in a location exposed to freezing temperatures or another non-temperature-controlled environment. Winterizing helps prevent frozen water, cracked tubing, damaged valves, and other cold-weather problems. Follow the product manual for the exact winterization procedure.

Go to Table of Content