Excel ThinAir Owner's Guide


  • Ensure installation is carried out by a licensed professional to meet local regulatory requirements.
  • Always disconnect the power source before commencing any servicing or installation procedures for safety.
  • The Excel Thin Air requires a dedicated circuit to ensure proper and reliable operation. It must also be appropriately grounded.
  • Position the hand dryer at least 2 feet away from other units to allow for efficient use. It should be installed near, but not directly over, the washbasin.
  • To prevent interference with the automatic sensor, mount the Thin Air at least 18 inches above or away from reflective surfaces.



  • Always turn off the power source before initiating any cleaning or maintenance procedures.
  • Clean unit surfaces using a mild soap solution or a non-abrasive cleaner to maintain a polished appearance.
  • Periodically inspect and clean air inlets to prevent any obstruction that may affect performance.
  • Gently wipe the sensor lens with a soft, clean cloth to ensure accurate and responsive automatic activation.
  • If equipped with a filter, check and replace it as recommended by the manufacturer to maintain optimal air quality.
  • Monitor the service indicator, if available, and follow manufacturer guidelines when service is needed.
  • Ensure proper ventilation around the unit for optimal performance.